Now this is something to sink your teeth into. When I saw this new release from Stampendous I knew I had to do something “over-the top” After coloring the rooster I put my markers away and prepared to get messy. A lot of layers are applied here and I had to step away to stop myself from going more nuts. I decided to teach this in a class at Scraps of Love next month. If you live local or want to make a drive be sure and sign up for the few spots that are left. You will learn tons of techniques plus get to play with some awesome products. Refer to the Class Schedule tab above for details.
REMOVED FOR PUBLICATION…come make it in class š
Products Used:
Stampendous!Ā® W113 Rooster Elements cling stamp
Stampendous!Ā® FRG07C Steel Blue crushed glass glitter
Stampendous!Ā® FRG11C Red crushed glass glitter
Stampendous!Ā® FRM05 Bronzed Mica fragments
Stampendous!Ā® Bark embossing powder
Stampendous!Ā® FRC11 Scarlet color fragments
TsukinekoĀ® Versamark watermark stamp pad
DecoArtĀ® Peacock pearl Dazzling metallic paint
DecoArtĀ® Black Tie multi-surface satin acrylic paint
DecoArtĀ® Metallic Lustreā¢ Copper Kettle
DecoArtĀ® Dimensional effectsā¢
DecoArtĀ® Decou-pageā¢ gloss
Dreamweaver Hexagon stencil
Want2Scrap Say it with pearls self adhesive pearls
MakeItCrafty Chipboard cogs and gears
Creative Impressions Antique copper brads
Book board (5 x 7.5)
Tissue paper
Smooth thick card stock for stamping and coloring image
TsukinekoĀ® memento Tuxedo black ink pad for stamping image
Alcohol Markers (Copic)
Heat gun
3M Foam pop up tape
gold Organza ribbon
Tim Holtz Stick pins
Metal gears – Michaels
small watch pieces
Instructions
Paint book board using Peacock pearl and a paint brush. While this layer dries take some tissue paper and apply a thin layer of the gloss Decou-pageā¢ to one side. This will be used as an adhesive. Apply the tissue paper to your choice of areas by scrunching onto painted board. Place the hexagon metal stencil onto the book board. Using a palette knife spread on DecoArtĀ® Dimensional effectsā¢ in a thin layer and allow to dry. Apply dimensional pearls randomly on piece. Once dry paint over everything again with the Peacock Pearl paint. Take some of the elements you wish to use later, paint with the Peacock pearl paint and set aside. Let dry. Using your finger, lightly rub on the DecoArtĀ® Metallic Lustreā¢ Copper Kettle over parts of the project such as the hexagon paste and the crumpled tissue paper. Cover the elements with the Copper Kettle Luster. Let dry. Take the Black Tie acrylic paint and using your finger apply to parts of the project, getting it into the cracks of the textures. Let dry slightly and the gently white off exposing the texture.
Stamp the Rooster Elements using Memento Tuxedo black stamp pad onto smooth white card stock. Color with alcohol markers. Put a thin coat of the gloss Decou-page over the rooster and let dry. Cut Rooster out. Using your Versamark stamp pad and the bark embossing powder, emboss the rooster elements stamp onto the background. Some of the image will not show up due to the texture. Heat set the embossed image. Using foam tape, pop up colored rooster on the base piece. Apply large painted cogs and gears using foam tape and regular adhesive depending on if you want the cog popped or flat. Using the gloss Decou-pageā¢ as adhesive apply the crushed glass glitter, mica and color fragments anywhere you desire. Heat pice of organza ribbon carefully with heat gun and allow to slightly curl. Stick into the book board base using stick pins. Using Decou-pageā¢ add small watch pieces. Frame your piece or use it for a book cover.
Bonus Frame Instructions
Supplies
Black 8 x 10 frame
Black 8 x 10 book board/chip board
DecoArtĀ® Dimensional effectsā¢
DecoArtĀ® Decou-pageā¢ gloss
Dreamweaver Hexagon stencil
DecoArtĀ® Peacock pearl Dazzling metallic paint
DecoArtĀ® Metallic Lustreā¢ Copper Kettle
Remove glass from 8″ x 10″ frame. Using a black frame wipe some Peacock Pearl paint over it and then let slightly dry. Wipe off some of the paint. Use rubbing alcohol to remove more if needed. Using the hexagon stencil apply Dimensional effects to frame. Let dry. Paint over dimensional effects with Peacock pearl and let dry. Rub on gently with your finger the Metallic Luster Copper Kettle. let dry. With your finger apply the black acrylic paint over parts of the Metallic luster and let slightly dry. But some off to reveal luster. Place Rooster piece on black book board and then place inside frame. Optional – add small elements such as watch pieces using Decou-pageā¢
Oh my liver this is the most gorgeous piece of art "ever!!!!!"
Hugz,
Gramma
I think I'm gonna sign up for this one!!! Love it Jenn!